Hoods are one of the most important accessories for each lens you own. A lens hood provides multiple functions: it shades the lens from stray light, improving your contrast and image quality; in inclement weather, it can assist in keeping moisture or wind-blown debris off the lens; and it protects the front barrel from the inevitable impacts against walls, door frames, and other real-life obstacles.

 

One of the most important accessories for each lens you own. A lens hood provides multiple functions: it shades the lens from stray light, improving your contrast and image quality; in inclement weather, it can assist in keeping moisture or wind-blown debris off the lens; and it protects the front barrel from the inevitable impacts against walls, door frames, and other real-life obstacles.

 

This lens hood is designed for Canon EF 28 f/2.8, EF 35 f/2 lenses.

 

EW54II Lens Hood, Diameter 52mm to suit EF 35-80mm f/4-5.6 III

 

Hoods are one of the most important accessories for each lens you own. A lens hood provides multiple functions: it shades the lens from stray light, improving your contrast and image quality; in inclement weather, it can assist in keeping moisture or wind-blown debris off the lens; and it protects the front barrel from the inevitable impacts against walls, door frames, and other real-life obstacles.

Lens hoods are primarily designed to prevent unwanted stray light from entering by extending and shading the end of the lens, ensuring no problems with vignetting or motor functions. Additionally, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact. Lens hoods match the specific focal length of the lens it was designed for.

This lens hood fits the following Canon lens:

• EF 70 to 200mm f2.8L IS USM

One of the most important accessories for each lens you own. A lens hood provides multiple functions: it shades the lens from stray light, improving your contrast and image quality; in inclement weather, it can assist in keeping moisture or wind-blown debris off the lens; and it protects the front barrel from the inevitable impacts against walls, door frames, and other real-life obstacles. Almost all EF and TS-E lenses have a Canon lens hood engineered specifically for it.

 

Canon lens hoods are one of the most important accessories for each lens you own. A lens hood provides multiple functions: it shades the lens from stray light, improving your contrast and image quality; in inclement weather, it can assist in keeping moisture or wind-blown debris off the lens; and it protects the front barrel from the inevitable impacts against walls, door frames, and other real-life obstacles. Almost all EF and TS-E lenses have a Canon lens hood engineered specifically for it.

 

 

 

 

 

 

Provides proper camera alignment for 90 vertical architectural shots with 35mm cameras.
Supplied with 1/4" camera screw.

Hexagonal mounting plate for quick release system.
Supplied with 3/8" camera screw.

 

Offers maximum safety for using or displaying cameras from any of our heads that utilise the hexagonal quick release system.
Locking system ensures removal of camera only with key or cutting tempered steel cable.
Cable length is 78".

The 303PLUS advanced panoramic photography head is built around the 300N pan rotation unit, with sliding plates for nodal point positioning and an elbow bracket to allow the camera to be mounted in either portrait or landscape orientation. It incorporates precise geared movements of the two sliding plates used to locate the camera over the panoramic axis of rotation, adding greater accuracy to nodal point positioning. The micro-positioning plates provide extremely precise fingertip adjustment via a gear drive system; a release button disengages the gear drive to facilitate rapid movement of the plates when required. The plates are also longer than those of the 303 head, which helps to make this head suitable for use with larger traditional or digital SLR cameras equipped with standard or wide angle lenses, or for medium format cameras.

 

	SPECIFICATIONS
	StillPhotography		yes
	Video		use to create VR movies
	MaximumLoadCapacity		5.0 kg (11 lbs)
	HeadHeight		31 cm (12.3 inches)
	Pan		360
	IndependentPanLock		yes
	Tilt		no
	Weight		2.2 kg (4.84 lbs)

 

• Double micro positioning sliding plates - 180mm (7.1 in) long with 120mm (4.7 in) of adjustment for precise nodal point positioning.
• Convenient quick release elbow bracket with 1/4 - 20and 3/8 male screw for camera attachment.
• 3/8 female tripod fitting.
• Dual graduated scale to set the angle of rotation to any of the following:
  90, 60, 45, 36, 30, 24, 20, 15, 10, 5
  (respectively equivalent to
  4, 6, 8, 10, 12, 15, 18, 24, 36 or 72
  photos to achieve a full 360 rotation) on upper part of 300N rotation unit.
• Graduated scale from 0 to 360 on lower part of 300N rotation unit.
• By removing vertical brackets, the 303PLUS can also be used as an object turntable.

 

	SPECIFICATIONS
	Finish		Black
	StillPhotography		Yes
	MaximumLoadCapacity		6.0 kg (13.3 lbs)
	HeadHeight		13 cm (5.2 inches)
	Pan		360
	Tilt		-30 +90 Frontal Tilt, -90 +30 Lateral Tilt
	QRPlateSupplied		200PL
	Weight		1.0 kg (2.3 lbs)

[Quick-release plates:]
	QUICK RELEASE PLATE RECTANGULAR 1/4[200PL-14]

 

	SPECIFICATIONS
	Finish		black
	Material		Aluminium
	StillPhotography		yes
	Video		yes
	ColumnType		rapid
	MaximumHeightwithextendedcentercolumn		165 cm (64.8 inches)
	MaximumHeight		133 cm (52.4 inches)
	MinimumHeight		49 cm (19.1 inches)
	ClosedLength		52 cm (20.3 inches)
	LegSections		4
	MaximumLoadCapacity		3.5 kg (7.7 lbs)
	Pan		360
	IndependentPanLock		yes
	PanHandle		yes
	Tilt		+90/-75
	IndependentTiltLock		yes
	QRPlateSupplied		yes
	Weight		1.7 kg (3.86 lbs)

backpack-style carrying bag included



The DIGI Quick action leg lever



3-way head with quick release plate included.

 

 

 

backpack-style carrying bag included



The DIGI Quick action leg lever



hybrid photo/video 3-way head with quick release plate

 

 

The 718B is a compact tripod with a built-in hybrid video/photo 3-Way head. It is similar to the 718SHB model, but with longer leg sections for greater extended height. The 718B has a "dovetail" quick release camera plate (which can be locked in place one-handed), separate pan and tilt locks, and a short pan/tilt bar for more ergonomic use while panning or tracking moving subjects. The leg pivot system uses a unique single hinge design in aluminium which both keeps the cross section smaller and allows the leg to fold shorter than conventional tripods. The tripod is built with "D" profile tubular legs for extra torsional rigidity and quick flip leg locks for ease and speed of set-up. A quick action lever also blocks the reversible center column extension. Comes complete with a carrying bag with twin shoulder straps for backpack style carrying. Head movements: PAN 360 / TILT +150 -80 / LEVEL +90 -0

 

backpack-style carrying bag included



The DIGI Quick action leg lever



hybrid photo/video 3-way head with quick release plate

 

Specifications

 

The retractable built-in ball head keeps the tripod even more compact and is ideal for lightweight cameras



Compact not only in length, but also in section, thanks to the innovative top casting design



quick action leg lock levers for speed in use



complete with rucksack-style carrying bag

Compact and lightweight but with full-size features, this tripod was designed for the new compact digital and conventional point and shoot cameras. We have been careful not to compromise stability for size and weight reduction. The incredibly short folded length of 44cm (17.2in) was achieved with two engineering breakthroughs. First we re-designed the leg pivot with a unique single hinge allowing the leg to fold shorter than conventional designs and secondly, we designed an integral ball head that actually is recessed into the main shoulder casting for transport.

But thats not all, this compact ball head allows a preset but adjustable tension to be set so that all you have to do is point the camera and shoot. No more locking off handles before you take that shot! This adjustment is done with a handle found on the bottom of the column, set it for your camera and forget it, then just aim and shoot. If you want to lock it down just turn the handle further and it will lock off the head. This four section tripod incorporates faceted tubular legs for extra torsional rigidity and quick flip leg locks for ease and quickness of set-up. The 714B comes complete with a carrying bag with twin shoulder straps for backpack style carrying.

Leg section diameters (mm): 24, 20, 16, 12.5

 

 

backpack-style carrying bag included



714B top view showing compact, innovative single leg pivot design



The DIGI Quick action leg lever



The built-in "permanent friction" ball head is ideal for lightweight cameras, and helps keep the tripod even more compact