— Suitable for use on uneven ground/tight narrow places
— Foam rubber hand grip, wrist strap, tiltpan head with handle, speed release leg locks & non-slip rubber foot
— Folded length: 600mm
— Min height: 600mm
— Max height: 1780mm
— Weight: 500gm
— Leg profile: 26.5mm

— Wind-up centre column
— 3-way head with quick release plate
— 3-section legs with centre-bracing
— Folded length: 690mm
— Min height: 650mm
— Max height: 1630mm
— Weight:1.7kg
— Leg profile: 40mm

Newly redesigned, the 190XDB is lighter in weight and slightly more compact. It has an ergonomics leg angle release mechanism and the wing locking knobs.

 

804RC2  BASIC PAN TILT HEAD W/QCK LOCK

3-way photo head constructed of ultra-durable and lightweight technical polymer, the 804RC2 easily withstands the daily rigors of the professional photographer. A unique spring feature has been added to the 804RC2 to assist in the tilt motion of the head to compensate for heavier, off-center loads. Ergonomic and newly designed handles fit comfortably in the hands, while the standard quick release plate fits snugly in the low-profile receiver.Plates Adapters: 200PL-38, 200PLARCH-14, 200PLARCH-38.

 

— Closed lenght : 53,5 cm
— Min height : 35 cm
— Max height with extended column: 146 cm
— Max height : 118,5 cm.
— Weight: 1,6 Kg.
— Max load capacity: 5 Kg.

804RC2 head specs:
— Height: 12 cm
— Weight: .75 kg
— Load capacity: 4.00 kg
— Material: technopolymer

 

 

— Closed lenght : 53,5 cm
— Min height : 35 cm
— Max height with extended column: 146 cm
— Max height : 118,5 cm.
— Weight: 1,6 Kg.
— Max load capacity: 5 Kg.

Newly redesigned, the 190XB is lighter in weight and slightly more compact. The ergonomics of the leg angle release mechanism and the quick action leg locks themselves have also been greatly improved.

 

804RC2  BASIC PAN TILT HEAD W/QCK LOCK

3-way photo head constructed of ultra-durable and lightweight technical polymer, the 804RC2 easily withstands the daily rigors of the professional photographer. A unique spring feature has been added to the 804RC2 to assist in the tilt motion of the head to compensate for heavier, off-center loads. Ergonomic and newly designed handles fit comfortably in the hands, while the standard quick release plate fits snugly in the low-profile receiver.Plates Adapters: 200PL-38, 200PLARCH-14, 200PLARCH-38.

 

— Closed length: 53.5 cm
— Minimum height: 8.0 cm
— Maximum height: 146.0 cm
— Weight: 1.80 kg
— Load capacity: 5.00 kg
— Colour: black
— Material: aluminium
— Leg sections: 3
— Leg angles: 25°,46°,66°,88°
— Center column: rapid

804RC2 head specs:
— Height: 12 cm
— Weight: .75 kg
— Load capacity: 4.00 kg
— Material: technopolymer

Newly redesigned, the 190XPROB makes the famous Manfrotto-patented horizontal centre column feature even easier to use. Now, by extending the column to its highest vertical position, it can be swung round to horizontal without removing the head or disassembling the column itself, so switching between framing and positioning setups is more convenient than ever. The ergonomics of the leg angle release mechanism and the quick action leg locks themselves have also been greatly improved.

 

804RC2  BASIC PAN TILT HEAD W/QCK LOCK

3-way photo head constructed of ultra-durable and lightweight technical polymer, the 804RC2 easily withstands the daily rigors of the professional photographer. A unique spring feature has been added to the 804RC2 to assist in the tilt motion of the head to compensate for heavier, off-center loads. Ergonomic and newly designed handles fit comfortably in the hands, while the standard quick release plate fits snugly in the low-profile receiver.Plates Adapters: 200PL-38, 200PLARCH-14, 200PLARCH-38.

 

— Horizontal or vertical centre column position
— Closed length: 57 cm
— Minimum height: 8.5 cm
— Maximum height: 146.0 cm
— Weight: 1.80 kg
— Load capacity: 5.00 kg
— Colour: black
— Material: aluminium
— Leg sections: 3
— Leg angles: 25°,46°,66°,88°
— Center column: rapid

804RC2 head specs:
— Height: 12 cm
— Weight: .75 kg
— Load capacity: 4.00 kg
— Material: technopolymer

The most compact, full size tripod in the Manfrotto range - the 715B is a four section tripod with an integral ball head with micro dovetail quick release plate. The ball mechanism retracts into the main shoulder casting for an even shorter folded length in transport. The leg pivot uses a unique single hinge design in aluminium which both keeps the cross section smaller and allows the leg to fold shorter than conventional tripods. The built-in ball head allows you to adjust and set its friction so that it balances the weight of your camera without needing locking and unlocking between positions. All you have to do is point the camera and shoot. Adjustment is via a handle found on the bottom of the column; set it for your camera and forget it! If you prefer to lock the head for extra security, just turn the handle one more time. Despite the reduced size, theres been no compromise of stability. Head movements: PAN 360 / TILT +90 -90

 

— Closed length: 45.5 cm
— Minimum height: 42.0 cm
— Maximum height: 134.5 cm
— Weight: 1.15 kg
— Load capacity: 1.00 kg
— Colour: black
— Material: aluminium
— Leg angles: 25°
— Center column: rapid
— 360°panoramic rotation

The most compact, full size tripod in the Manfrotto range, the 715SHB DIGI MICRO is a four-section tripod with an integral ball head with micro "dovetail" quick release plate. The ball mechanism retracts into the main shoulder casting for an even shorter folded length in transport. The leg pivot uses a unique single hinge design in aluminum which both keeps the cross section smaller and allows the leg to fold shorter than conventional tripods. The built-in ball head allows you to adjust and set its friction so that it balances the weight of your camera without needing to lock and unlock between positions. All you have to do is point the camera and shoot. Adjustment is via a handle found on the bottom of the column; set it for your camera and forget it! If you prefer to lock the head for extra security, just turn the handle one more time. Despite the reduced size, there's been no compromise on stability. Head movements: pan 360 / tilt +90 -90.

 

— Closed length: 36.5 cm
— Minimum height: 34.0 cm
— Maximum height: 122.7 cm
— Weight: 1.00 kg
— Load capacity: 1.00 kg
— Colour: black
— Material: aluminium
— Leg angles: 25°
— 360°panoramic rotation