Infocus X6 DLP Data Projector

 

- 2200 Ansi

- SVGA 800X600

- Contrast ratio 2000:1

- 5-segment colour Wheel

- 2 yrs warranty

- Native Aspect Ratio 4x3

- Supported Aspect Ratio: 16:9, 4:3, 5:4

- Brightness: (max ANSI lumens) High Bright: 2000 Lumens

- Contrast Ratio: 2000 : 1

- Display Technology: DLP by Texas Instruments

- 0.55" SVGA LVDS with Brilliant Color

 

Infocus X17 DLP ata Projector

 

- 2300 Ansi Lumens

- XGA 1024X768

- Contrast ratio1400:1

- 6segment colour Wheel

- 2 yrs warranty

- Native Aspect Ratio:4:3

- Supported Aspect Ratio:16:9, 4:3

- 5:4 -Brightness

- High Bright 2300 LumensEco Mode: 1900 Lumens

- Color Wheel 6-segment (RGBYCW)

- Standard Lens Projection Distance: 4.9 - 19.68 ft (1.49 - 6 m)-

- Connectivity: 1 x VGA

 

Display
Native Aspect Ratio:	4x3
Supported Aspect Ratio:	16:9, 4:3, 5:4
Brightness: (max ANSI lumens)	High Bright: 2300 Lumens Eco Mode: 1900 Lumens
Contrast Ratio:	2000 : 1Full On/Full Off
Display Technology:	DLP by Texas Instruments: 0.55" LVDS with Brilliant Color
Data Compatibility:	VGA (640x480), SVGA (800x600), XGA (1024x768), SXGA (1280x1024), SXGA+ (1400x1050)
Video Compatibility:	Full NTSC, PAL, SECAM, 480i, 576i, 480p, 576p, 720p, 1080i
Color Wheel (DLP Only):	6-segment (RGBYCW)
Native Resolution:	XGA
Projector Placement:	Ceiling Projection, Front Projection, Rear Projection
SMPTE Brightness:	Not Available
Lamp Wattage:	High Bright: Not Available Eco Mode: 140 Watts
Lamp Life:	High Bright: Not Available Eco Mode: 4000 Hours
Minimum Image Size:	2.25 ft (0.69 m)
Maximum Image Size:	21 ft (6.4 m)
Standard Lens Zoom:	1.1 : 1
Standard Lens Throw Ratio:	1.9 - 2.1 (Distance/Width)
Standard Lens Image Offset Ratio:	120%
Standard Lens Projection Distance:	4.9 - 19.68 ft (1.49 - 6 m)
Digital Keystone Correction (Vertical):	+30/-30
Digital Keystone Correction (Horizontal):	Not Available
Lens Shift:	Not Available
Inputs and Outputs
DVI:	Not Available
M1:	Not Available
HDMI:	Not Available
BNC:	Not Available
Component (RCA):	Number of Inputs:0 480i/480p/576i/756p/720p/1080i requires optional VESA to Component adapter cable.
VESA (HD15):	Number of Inputs:1 15-pin analog
S-Video:	Number of Inputs:1 4-pin mini-DIN
Composite (RCA):	Number of Inputs:1
Standard Definition TV:	Composite RCA, S-Video
Enhanced Definition TV:	VGA
High Definition TV:	VGA
Computer:	VGA
HDCP Support:	No
Stereo RCA Jacks Inputs:	No
Stereo 3.5 mm Mini-jack Inputs:	Yes
12v trigger for motorized screens (3.5 mm mini-jack):	No
Projector Control:	Projector Keypad, Remote, RS-232
Speakers:	5.0 Watt mono speaker
Monitor Output:	Yes
Audio Output:	Not Available
Compatibility
Data Compatibility:	VGA (640x480), SVGA (800x600), XGA (1024x768), SXGA (1280x1024), SXGA+ (1400x1050)
H-Sync Range:	31.35 - 68.7kHz
V-Sync Range:	56 - 85Hz
Video Compatibility:	Full NTSC, PAL, SECAM, 480i, 576i, 480p, 576p, 720p, 1080i
General
Audible Noise:	29 dB
Actual Dimensions:	Height: 4.4 in (11.18 cm) Length: 10.39 in (26.39 cm) Width: 8.8 in (22.35 cm)
Actual Weight:	5.3 lbs (2.4 kg)
Shipping Dimensions:	Not Available
Shipping Weight:	Not Available
Projector Warranty:	2 years
Lamp Warranty:	6 months
Accessories Warranty:	90 days
Operating temperature: (at sea level)	41 - 95 F (5 - 35 C)
Maximum Altitude Supported:	Not Available
Typical Power Consumption:	285 Watts
Maximum Power Consumption:	Not Available
Power Supply:	100 - 240 Volts at 50 - 60 Hz
Menu Languages:	English, French, German, Italian, Norwegian, Portuguese, Simplified Chinese, Spanish, Russian, Swedish, Danish, Turkish, Polish, Finnish, Dutch
Approvals:	UL and c-UL (US/Canada), FCC (US/Canada), CE (CE member countries), GOST (Russia), CCC (China),PSB, MIC, EK

Big power, small price
The X9 DLP projector delivers a home theater experience without the home theater price tag. With native 720p resolution, 1800 video-optimized lumens and every connector from VGA to HDMI, the X9 is designed for easy setup and pleasing performance.

Video Performance
A 2500:1 contrast ratio and 1800 video-optimized lumens ensure an outstanding image every time you turn on the X9. DLP BrilliantColor technology ensures true-to-life colors that dont degrade over time. Now imagine this stunning image at larger-than-life size and you begin to see the power of the X9.

Connectivity
Select from HDMI 1.3, component, VGA, composite or S-video the X9 is ready to connect to your PC, DVD player, game console and more. RS232 and IR give you a choice of control options.

Tabletop or Ceiling Ready
The X9 can be used on a tabletop, mounted on the ceiling (with optional ceiling mount) or set for rear projection. A simple keypad and a full-featured remote ensure easy setup, and DLP technology eliminates the need for filter maintenance.

 

Accessories:

 

 

 

Samsung 8'' Digital Photo Frame, Black

 

- 800 x 600

- SD/MMC/MS input

- JPG/MP3/MP4/WMV9 playback

- speaker

- battery (1hr)

- WiFi (802.11b/g

- Auto DHCP

- 64MB built in memory

- 20cd/m2

- 400:1DC

- USB:  1 Host(USB2.0), 1 Device(USB2.0)

- Mini-Monitor

 - Speaker

Samsung 8''Digital Photo Frame,

 

- Black

- 800 x 600

- SD/MMC/MS input

- JPG/MP3 playback

- speaker

- battery (1hr)

- 1GB memory

- 200 cd/m2

- 400:1 DC

- Speaker

Samsung 10.2'' Digital Photo Frame

 

- Black

- 800 x 600

- SD/MMC/MS input

- JPG/MP3/MP4/WMV9 playback

- speaker

- battery (1hr)

- WiFi (802.11b/g)

-  Auto DHCP

- 64MB built in memory

- 20cd/m2

- 400:1DC

- USB:  1 Host(USB2.0), 1 Device(USB2.0),

- Mini-Monitor

- Speak

INDURO CARBONFLEX 8X CX-Series carbon fiber tripods offer extra flexibility with a quick switch center column that's easily positionable from vertical to horizontal and just about anywhere in-between. The lightweight solution for Special Applications, Macro, Copy, Scientific, Industrial and Commercial Photography. CX-Series tripods are made of the latest generation of high quality 8-layer carbon fiber tubing which is 60% stronger overall than conventional carbon fiber material. Each leg lock has a specially designed dust and moisture-resistant seal and most tripods include interchangeable rubber feet and stainless steel spikes.

 

PRODUCT : Laser Flash Drive
COLOUR : Green
CAPACITY : 4GB
I/FACE : USB
T/RATE : 480 Mb/s
OS SUPP : Win ME, Win 2000, Win XP, Win Vista
Mac OS 9.x, Linux 2.4 or higher
DIM : 60 x 17 x 8 mm (H/L/W)
FEATURES:
* Smart and secure removable storage for business and personal use
* Stylish Aluminium casing
* Easy plug and play
* No External power supply or battery required

 

	Multi-Angle Positionable Center Column provides the most versatile camera positioning		Tubular Center Column prevents unwanted column rotation
	Non-Rotating Leg Sections offer quick and easy setup		Dust and Moisture Resistant Rubber Grip Leg Locks ensure a positive lock in any condition
	Reversible Center Column allows low angle shooting		Interchangeable Rubber Feet and Stainless Steel Spikes provide the right contact on any surface or terrain
	Adjustable Angle Leg Locks accommodate uneven surfaces and awkward shooting situations		Reversible Tripod Head Mounting Screw assures compatibility with virtually any tripod head
	Built-in Bubble Level allows adjustment to prevent uneven pans and tripod head movements		Weight Hook allows additional weight mounting stability during windy conditions
	Closed Cell Foam Grip provides comfortable handling during cold or hot outdoor conditions		Tripod Head Set Screws add mounting security for tripod heads

 

Material	Carbon Fiber
Maximum Load	17.6 lbs (8 kg)
Max Height (24 Leg Angle) w/Column Extended	63.6 in (1614 mm)
Max Height (24 Leg Angle) w/Column Retracted	56.5 in (1435 mm)
Min Height (24 Leg Angle) w/Column Retracted	23.9 in (606 mm)
Min Height (80 Leg Angle) w/Short Column	9.6 in (244 mm)
Max Height	in mm)
Height	in mm)
Width Including Knobs	in mm)
Length	in mm)
Folded Length	25.8 in (654 mm)
Number of Leg Sections	3
Leg Lock Type	Moisture and dust-resistant locking knobs
Independent Leg Spread	Yes, with stops at 80, 55 and 24
Center Column	Positionable 0 ~ 90
Tilt Range
Drag Control
Panning Range
Separate Panning Lock
Quick Release Plate
Bubble Level
Fold-Out Stabilizer Legs
Hand Grip and Wrist Strap
Spiked Feet	Removable - Included
Head Mount Thread Size	1/4"-20 & 3/8"-16
Ballhead Base Mount Thread Size
Weight	4 lbs (1.8 kg)

INDURO CARBONFLEX 8X CX-Series carbon fiber tripods offer extra flexibility with a quick switch center column that's easily positionable from vertical to horizontal and just about anywhere in-between. The lightweight solution for Special Applications, Macro, Copy, Scientific, Industrial and Commercial Photography. CX-Series tripods are made of the latest generation of high quality 8-layer carbon fiber tubing which is 60% stronger overall than conventional carbon fiber material. Each leg lock has a specially designed dust and moisture-resistant seal.

	Multi-Angle Positionable Center Column provides the most versatile camera positioning		Tubular Center Column prevents unwanted column rotation
	Non-Rotating Leg Sections offer quick and easy setup		Dust and Moisture Resistant Rubber Grip Leg Locks ensure a positive lock in any condition
	Reversible Center Column allows low angle shooting		Interchangeable Rubber Feet and Stainless Steel Spikes provide the right contact on any surface or terrain
	Adjustable Angle Leg Locks accommodate uneven surfaces and awkward shooting situations		Reversible Tripod Head Mounting Screw assures compatibility with virtually any tripod head
	Built-in Bubble Level allows adjustment to prevent uneven pans and tripod head movements		Weight Hook allows additional weight mounting stability during windy conditions
	Closed Cell Foam Grip provides comfortable handling during cold or hot outdoor conditions		Tripod Head Set Screws add mounting security for tripod heads

 

Specifications:

Material	Carbon Fiber
Maximum Load	9.9 lbs (4.5 kg)
Max Height (24 Leg Angle) w/Column Extended	58.2 in (1478 mm)
Max Height (24 Leg Angle) w/Column Retracted	50.9 in (1292 mm)
Min Height (24 Leg Angle) w/Column Retracted	18.9 in (481 mm)
Min Height (80 Leg Angle) w/Short Column	9 in (229 mm)
Max Height	in mm)
Height	in mm)
Width Including Knobs	in mm)
Length	in mm)
Folded Length	20.2 in (513 mm)
Number of Leg Sections	4
Leg Lock Type	Moisture and dust-resistant locking knobs
Independent Leg Spread	Yes, with stops at 80, 55 and 24
Center Column	Positionable 0 ~ 90
Tilt Range
Drag Control
Panning Range
Separate Panning Lock
Quick Release Plate
Bubble Level
Fold-Out Stabilizer Legs
Hand Grip and Wrist Strap
Spiked Feet	None
Head Mount Thread Size	1/4"-20 & 3/8"-16
Ballhead Base Mount Thread Size
Weight	3.5 lbs (1.6 kg)

INDURO CARBONFLEX 8X CX-Series carbon fiber tripods offer extra flexibility with a quick switch center column that's easily positionable from vertical to horizontal and just about anywhere in-between. The lightweight solution for Special Applications, Macro, Copy, Scientific, Industrial and Commercial Photography. CX-Series tripods are made of the latest generation of high quality 8-layer carbon fiber tubing which is 60% stronger overall than conventional carbon fiber material. Each leg lock has a specially designed dust and moisture-resistant seal and most tripods include interchangeable rubber feet and stainless steel spikes.

 

	Multi-Angle Positionable Center Column provides the most versatile camera positioning		Tubular Center Column prevents unwanted column rotation
	Non-Rotating Leg Sections offer quick and easy setup		Dust and Moisture Resistant Rubber Grip Leg Locks ensure a positive lock in any condition
	Reversible Center Column allows low angle shooting		Interchangeable Rubber Feet and Stainless Steel Spikes provide the right contact on any surface or terrain
	Adjustable Angle Leg Locks accommodate uneven surfaces and awkward shooting situations		Reversible Tripod Head Mounting Screw assures compatibility with virtually any tripod head
	Built-in Bubble Level allows adjustment to prevent uneven pans and tripod head movements		Weight Hook allows additional weight mounting stability during windy conditions
	Closed Cell Foam Grip provides comfortable handling during cold or hot outdoor conditions		Tripod Head Set Screws add mounting security for tripod heads

 

Material	Carbon Fiber
Maximum Load	9.9 lbs (4.5 kg)
Max Height (24 Leg Angle) w/Column Extended	58.3 in (1481 mm)
Max Height (24 Leg Angle) w/Column Retracted	51.1 in (1297 mm)
Min Height (24 Leg Angle) w/Column Retracted	21.9 in (557 mm)
Min Height (80 Leg Angle) w/Short Column	10.8 in (273 mm)
Max Height	in mm)
Height	in mm)
Width Including Knobs	in mm)
Length	in mm)
Folded Length	23.4 in (595 mm)
Number of Leg Sections	3
Leg Lock Type	Moisture and dust-resistant locking knobs
Independent Leg Spread	Yes, with stops at 80, 55 and 24
Center Column	Positionable 0 ~ 90
Tilt Range
Drag Control
Panning Range
Separate Panning Lock
Quick Release Plate
Bubble Level
Fold-Out Stabilizer Legs
Hand Grip and Wrist Strap
Spiked Feet	Removable - Included
Head Mount Thread Size	1/4"-20 & 3/8"-16
Ballhead Base Mount Thread Size
Weight	3.4 lbs (1.5 kg)

NDURO ALLOY 6M A-Series tripods are made from high quality aluminum alloy and are precisely machined to offer the quality and strength demanded by professional Studio, Student, Portrait, Advertising, Industrial and Wedding Photographers. A-Series tripods feature extruded 6000 series Aluminum legs with a wall thickness of 1.5mm. Each leg lock has a specially designed dust and moisture-resistant seal and most tripods include interchangeable rubber feet and stainless steel spikes.

 

	Grooved Center Column prevents unwanted column rotation		Non-Rotating Leg Sections offer quick and easy setup
	Dust and Moisture Resistant Rubber Grip Leg Locks ensure a positive lock in any condition		Reversible Center Column allows low angle shooting
	Interchangeable Rubber Feet and Stainless Steel Spikes provide the right contact on any surface or terrain		Adjustable Angle Leg Locks accommodate uneven surfaces and awkward shooting situations
	Reversible Tripod Head Mounting Screw assures compatibility with virtually any tripod head		Built-in Bubble Level allows adjustment to prevent uneven pans and tripod head movements
	Spring Loaded Weight Hook allows additional weight mounting stability during windy conditions		Closed Cell Foam Grip provides comfortable handling during cold or hot outdoor conditions
	Tripod Head Set Screws add mounting security for tripod heads

 

Material	Aluminum Alloy
Maximum Load	26.5 lbs (12 kg)
Max Height (24 Leg Angle) w/Column Extended	73.2 in (1859 mm)
Max Height (24 Leg Angle) w/Column Retracted	66.6 in (1692 mm)
Min Height (24 Leg Angle) w/Column Retracted	22.2 in (565 mm)
Min Height (80 Leg Angle) w/Short Column	8.1 in (208 mm)
Max Height	in mm)
Height	in mm)
Width Including Knobs	in mm)
Length	in mm)
Folded Length	24.3 in (618 mm)
Number of Leg Sections	4
Leg Lock Type	Moisture and dust-resistant locking knobs
Independent Leg Spread	Yes, with stops at 80, 55 and 24
Center Column	Grooved-Rapid
Tilt Range
Drag Control
Panning Range
Separate Panning Lock
Quick Release Plate
Bubble Level
Fold-Out Stabilizer Legs
Hand Grip and Wrist Strap
Spiked Feet	Removable - Included
Head Mount Thread Size	1/4"-20 & 3/8"-16
Ballhead Base Mount Thread Size
Weight	7.8 lbs (3.6 kg)

INDURO ALLOY 6M A-Series tripods are made from high quality aluminum alloy and are precisely machined to offer the quality and strength demanded by professional Studio, Student, Portrait, Advertising, Industrial and Wedding Photographers. A-Series tripods feature extruded 6000 series Aluminum legs with a wall thickness of 1.5mm. Each leg lock has a specially designed dust and moisture-resistant seal and most tripods include interchangeable rubber feet and stainless steel spikes.

 

	Grooved Center Column prevents unwanted column rotation		Non-Rotating Leg Sections offer quick and easy setup
	Dust and Moisture Resistant Rubber Grip Leg Locks ensure a positive lock in any condition		Reversible Center Column allows low angle shooting
	Interchangeable Rubber Feet and Stainless Steel Spikes provide the right contact on any surface or terrain		Adjustable Angle Leg Locks accommodate uneven surfaces and awkward shooting situations
	Reversible Tripod Head Mounting Screw assures compatibility with virtually any tripod head		Built-in Bubble Level allows adjustment to prevent uneven pans and tripod head movements
	Spring Loaded Weight Hook allows additional weight mounting stability during windy conditions		Closed Cell Foam Grip provides comfortable handling during cold or hot outdoor conditions
	Tripod Head Set Screws add mounting security for tripod heads

 

Specifications:

Material	Aluminum Alloy
Maximum Load	26.5 lbs (12 kg)
Max Height (24 Leg Angle) w/Column Extended	73 in (1854 mm)
Max Height (24 Leg Angle) w/Column Retracted	66.4 in (1687 mm)
Min Height (24 Leg Angle) w/Column Retracted	27.1 in (687 mm)
Min Height (80 Leg Angle) w/Short Column	7.4 in (188 mm)
Max Height	in mm)
Height	in mm)
Width Including Knobs	in mm)
Length	in mm)
Folded Length	29.6 in (752 mm)
Number of Leg Sections	3
Leg Lock Type	Moisture and dust-resistant locking knobs
Independent Leg Spread	Yes, with stops at 80, 55 and 24
Center Column	Grooved-Rapid
Tilt Range
Drag Control
Panning Range
Separate Panning Lock
Quick Release Plate
Bubble Level
Fold-Out Stabilizer Legs
Hand Grip and Wrist Strap
Spiked Feet	Removable - Included
Head Mount Thread Size	1/4"-20 & 3/8"-16
Ballhead Base Mount Thread Size
Weight	8 lbs (3.6 kg)

INDURO ALLOY 6M A-Series tripods are made from high quality aluminum alloy and are precisely machined to offer the quality and strength demanded by professional Studio, Student, Portrait, Advertising, Industrial and Wedding Photographers. A-Series tripods feature extruded 6000 series Aluminum legs with a wall thickness of 1.5mm. Each leg lock has a specially designed dust and moisture-resistant seal and most tripods include interchangeable rubber feet and stainless steel spikes.

 

	Grooved Center Column prevents unwanted column rotation		Non-Rotating Leg Sections offer quick and easy setup
	Dust and Moisture Resistant Rubber Grip Leg Locks ensure a positive lock in any condition		Reversible Center Column allows low angle shooting
	Interchangeable Rubber Feet and Stainless Steel Spikes provide the right contact on any surface or terrain		Adjustable Angle Leg Locks accommodate uneven surfaces and awkward shooting situations
	Reversible Tripod Head Mounting Screw assures compatibility with virtually any tripod head		Built-in Bubble Level allows adjustment to prevent uneven pans and tripod head movements
	Spring Loaded Weight Hook allows additional weight mounting stability during windy conditions		Closed Cell Foam Grip provides comfortable handling during cold or hot outdoor conditions
	Tripod Head Set Screws add mounting security for tripod heads

 

Material	Aluminum Alloy
Maximum Load	22 lbs (10 kg)
Max Height (24 Leg Angle) w/Column Extended	67.9 in (1726 mm)
Max Height (24 Leg Angle) w/Column Retracted	61.4 in (1559 mm)
Min Height (24 Leg Angle) w/Column Retracted	20.9 in (530 mm)
Min Height (80 Leg Angle) w/Short Column	6.9 in (175 mm)
Max Height	in mm)
Height	in mm)
Width Including Knobs	in mm)
Length	in mm)
Folded Length	22.9 in (581 mm)
Number of Leg Sections	4
Leg Lock Type	Moisture and dust-resistant locking knobs
Independent Leg Spread	Yes, with stops at 80, 55 and 24
Center Column	Grooved-Rapid
Tilt Range
Drag Control
Panning Range
Separate Panning Lock
Quick Release Plate
Bubble Level
Fold-Out Stabilizer Legs
Hand Grip and Wrist Strap
Spiked Feet	Removable - Included
Head Mount Thread Size	1/4"-20 & 3/8"-16
Ballhead Base Mount Thread Size
Weight	6.4 lbs (2.9 kg)

Overview:

With the new LaCie CurrenKey you can easily transfer and transport your important data. The inventive, appealing coin design is both eye-catching and practical, and the USB connector can be revealed by a simple twist. With the universal Hi-Speed USB 2.0 interface, the cross-platform LaCie CurrenKey can be used with all PC or Mac computers. Hi-Speed USB 2.0 not only offers universal compatibility and cross-platform convenience, but features hot-pluggable connection and high-speed transfer rates. The metal die-cast construction of the LaCie CurrenKey makes it sturdy and dependable. Its backward compatible with USB 1.1, so you can use it with any computer. A product of the 5.5 Designers firm, the LaCie CurrenKey fits in your pocket, letting you take your data with you wherever you go. The third in a line of new collectible products produced in conjunction with 5.5 Designers, the stylish CurrenKey is a practical tool for your home or business, but its playful and inventive design differentiates it from other USB Flash drives on the market.

 

 

Item Number:	130826
Capacity:	8 GB
Color:	Silver
Interface:	USB 2.0 (backward compatible with USB 1.1)
Interface Transfer Rate:	up to 480Mbits/s
Size:	36 x 9 mm / 1.42 x 0.35 in.
System Requirements:	Windows 2000, Windows XP or Windows Vista Mac OS X v10.3.5 or higher
Box Content:	LaCie CurrenKey

***Specications and appearance are given as guidelines and may change without notice.

 

4GB bronze CurrenKey USB2.0 design by 5.5

 

With the new LaCie CurrenKey you can easily transfer and transport your important data. The inventive, appealing coin design is both eye-catching and practical, and the USB connector can be revealed by a simple twist. With the universal Hi-Speed USB 2.0 interface, the cross-platform LaCie CurrenKey can be used with all PC or Mac computers. Hi-Speed USB 2.0 not only offers universal compatibility and cross-platform convenience, but features hot-pluggable connection and high-speed transfer rates. The metal die-cast construction of the LaCie CurrenKey makes it sturdy and dependable. Its backward compatible with USB 1.1, so you can use it with any computer. A product of the 5.5 Designers firm, the LaCie CurrenKey fits in your pocket, letting you take your data with you wherever you go. The third in a line of new collectible products produced in conjunction with 5.5 Designers, the stylish CurrenKey is a practical tool for your home or business, but its playful and inventive design differentiates it from other USB Flash drives on the market.

 

Lexmark TPANZ07 #1 Ink Cartridge Twin Pack  - Colour

 

Compatible with Z735, X2350, X2370, X2450, X2470, X3450, X3470

Lexmark TPANZ06 #27 Ink Cartridge Twin Pack - Colour

 

Compatible with Z13, Z23, Z25, Z33, Z35,Z603, Z605, X75, X1140, X1150, Z513, Z515, Z615, X1185, X2250, Z517, Z617 and X1195

Lexmark TPANZ04 #82 + #83 Ink Cartridge Twin Pack - Black, Colour

 

Compatible with Z55, Z65, Z65n, X5150, X6150, X6170.

INDURO ALLOY 6M A-Series tripods are made from high quality aluminum alloy and are precisely machined to offer the quality and strength demanded by professional Studio, Student, Portrait, Advertising, Industrial and Wedding Photographers. A-Series tripods feature extruded 6000 series Aluminum legs with a wall thickness of 1.5mm. Each leg lock has a specially designed dust and moisture-resistant seal and most tripods include interchangeable rubber feet and stainless steel spikes.

 

	Grooved Center Column prevents unwanted column rotation		Non-Rotating Leg Sections offer quick and easy setup
	Dust and Moisture Resistant Rubber Grip Leg Locks ensure a positive lock in any condition		Reversible Center Column allows low angle shooting
	Interchangeable Rubber Feet and Stainless Steel Spikes provide the right contact on any surface or terrain		Adjustable Angle Leg Locks accommodate uneven surfaces and awkward shooting situations
	Reversible Tripod Head Mounting Screw assures compatibility with virtually any tripod head		Built-in Bubble Level allows adjustment to prevent uneven pans and tripod head movements
	Spring Loaded Weight Hook allows additional weight mounting stability during windy conditions		Closed Cell Foam Grip provides comfortable handling during cold or hot outdoor conditions
	Tripod Head Set Screws add mounting security for tripod heads

 

Specifications:

Material	Aluminum Alloy
Maximum Load	22 lbs (10 kg)
Max Height (24 Leg Angle) w/Column Extended	67.9 in (1724 mm)
Max Height (24 Leg Angle) w/Column Retracted	61.2 in (1556 mm)
Min Height (24 Leg Angle) w/Column Retracted	25 in (635 mm)
Min Height (80 Leg Angle) w/Short Column	8.1 in (205 mm)
Max Height	in mm)
Height	in mm)
Width Including Knobs	in mm)
Length	in mm)
Folded Length	27.5 in (698 mm)
Number of Leg Sections	3
Leg Lock Type	Moisture and dust-resistant locking knobs
Independent Leg Spread	Yes, with stops at 80, 55 and 24
Center Column	Grooved-Rapid
Tilt Range
Drag Control
Panning Range
Separate Panning Lock
Quick Release Plate
Bubble Level
Fold-Out Stabilizer Legs
Hand Grip and Wrist Strap
Spiked Feet	Removable - Included
Head Mount Thread Size	1/4"-20 & 3/8"-16
Ballhead Base Mount Thread Size
Weight	6.6 lbs (3 kg)

Lexmark TPANZ01 #16 Ink Cartridge Twin Pack - Black/Black

 

Compatible with Z13, Z23, Z25, Z33, Z35, Z603, Z605, X75, X1140, X1150, Z513, Z515, Z615, X1185, X2250, Z517, Z617 and X1195

Lexmark 3PANZ02 #32/#32/#33 Ink Cartridge Triple Pack - Black, Black, Colour

 

Compatible with Z815, Z818, Z816, X3350, X5250, X5270, X5470, X7170, X7350, X8350, P915, P4350, P6250.

Lexmark 3PANZ01 #17/#17/#27  Ink Cartridge Tri-Pack - Moderate Black, Moderate Black, Moderate Colour

 

Compatible with Z13, Z23, Z25, Z33, Z35,Z603, Z605, X75, X1140, X1150, Z513, Z515, Z615, X1185, X2250, Z517, Z617 and X1195

INDURO ALLOY 6M A-Series tripods are made from high quality aluminum alloy and are precisely machined to offer the quality and strength demanded by professional Studio, Student, Portrait, Advertising, Industrial and Wedding Photographers. A-Series tripods feature extruded 6000 series Aluminum legs with a wall thickness of 1.5mm. Each leg lock has a specially designed dust and moisture-resistant seal and most tripods include interchangeable rubber feet and stainless steel spikes.

	Grooved Center Column prevents unwanted column rotation		Non-Rotating Leg Sections offer quick and easy setup
	Dust and Moisture Resistant Rubber Grip Leg Locks ensure a positive lock in any condition		Reversible Center Column allows low angle shooting
	Interchangeable Rubber Feet and Stainless Steel Spikes provide the right contact on any surface or terrain		Adjustable Angle Leg Locks accommodate uneven surfaces and awkward shooting situations
	Reversible Tripod Head Mounting Screw assures compatibility with virtually any tripod head		Built-in Bubble Level allows adjustment to prevent uneven pans and tripod head movements
	Spring Loaded Weight Hook allows additional weight mounting stability during windy conditions		Closed Cell Foam Grip provides comfortable handling during cold or hot outdoor conditions
	Tripod Head Set Screws add mounting security for tripod heads

 

Material	Aluminum Alloy
Maximum Load	17.6 lbs (8 kg)
Max Height (24 Leg Angle) w/Column Extended	65.9 in (1675 mm)
Max Height (24 Leg Angle) w/Column Retracted	57.2 in (1453 mm)
Min Height (24 Leg Angle) w/Column Retracted	23.4 in (594 mm)
Min Height (80 Leg Angle) w/Short Column	10.1 in (257 mm)
Max Height	in mm)
Height	in mm)
Width Including Knobs	in mm)
Length	in mm)
Folded Length	25.1 in (638 mm)
Number of Leg Sections	3
Leg Lock Type	Moisture and dust-resistant locking knobs
Independent Leg Spread	Yes, with stops at 80, 55 and 24
Center Column	Grooved-Rapid
Tilt Range
Drag Control
Panning Range
Separate Panning Lock
Quick Release Plate
Bubble Level
Fold-Out Stabilizer Legs
Hand Grip and Wrist Strap
Spiked Feet	Removable - Included
Head Mount Thread Size	1/4"-20 & 3/8"-16
Ballhead Base Mount Thread Size
Weight	5.1 lbs (2.3 kg)

Lexmark TPANZ09 #32 and #33Ink Cartridge Twin Pack - Black and Colour 

 

Compatible with Z815, Z818, Z816, X3350, X5250, X5270, X5470, X7170, X7350, X8350, P915, P4350, P6250.

Lexmark TPANZ14 Twin Pack #44/44 High Yield Mono.

 

Compatible with P350, X9350.

Lexmark 12A1990A #90 Photo Print Cartridge

 

Compatible with 3200, 5000, 5770, 5700, 7000, 7200, Z31, Z42, Z43, Z45, Z51, Z52, Z53, Z705, P707, P3150.